|
|
| Question | | How do I level my platform? | | | | Answer |
- On level ground lower the platform until knife skid plates lightly touch the ground.
- Loosen adapter spring level bolt lock nut.
- Adjust adapter level bolt until the flat washer has 1mm of clearance off the bolt head.
- Lock up adapter level bolt nut.
- Check the suspension adjustment nut is set at the top of the threaded suspension shaft (lowest spring preload).
- Lift the platform so outer platform wheels clear the ground. If platform is still not level, wind the suspension adjustment nut to compress (increase spring preload) the spring on the side that is hanging low. (This will now be the adapter spring neutral position).
| | | | Categories | | Adaptors | | | | Back to FAQs | |
|
|
| |
|
