forage header

How to choose a forage platform for your hay and silage operation

If you cut hay or silage at any scale, you already know what a forage platform does and how much rides on getting it right. The platform feeding your forage chopper sets the pace for the whole job, and the gap between a purpose-built forage draper and a grain platform used for forage work shows up fast in heavy, wet, or laid crops.

This guide is for farmers who are past the basics and weighing up their options. We are going to take you through what separates one forage platform from another, the questions worth asking before you commit, and where our DURUS Forage Platform sits in that picture.

Purpose-built or adapted: the first question to ask

The biggest distinction between forage platforms is whether the machine was engineered for forage from the ground up or adapted from a grain harvest platform. Forage crops are heavier, bulkier, and cut across a wider moisture range than grain. That loads the cutterbar and feed system in ways that an adapted machine was never built for.

We built custom platforms specifically for the forage industry. For an operator covering large areas of hay or silage, that difference shows up as steadier crop flow and fewer harvesting delays.

forage platform

The drive system: can it hold cutting power under load?

In dense crops, the drive system takes a beating, and it is one of the first places a header shows its limits. When you compare machines, don’t just go off the advertised power figures. Make sure you’re asking how that power gets to the cutterbar, and whether the machine can actually hold up while you work through thick crop.

Our DURUS Forage Platform runs a drive built specifically to hold constant cutting power under all loads by using stretch-free carbon cog belts. Those belts carry high torque, run at lower operating temperatures, and last longer than standard belting. That all comes straight off your downtime and running costs.

Our top questions to ask when you’re considering forage platforms:

  • How is power transferred to the cutterbar?
  • What drive components or belts does it use, and what do they cost to replace?
  • How does it perform in heavy, dense crops?
  • What maintenance does the drive need, and how often?

Cutting performance when conditions turn

Let’s be honest, conditions are rarely perfect for a full season. Moisture, heavy growth, and lodged material are all going to test your platform, and the machine that can hold consistent feeding and cutting through the bad days is the one that will protect your harvest.

Our DURUS Forage Platform runs a hydraulic system and a revised cutting design aimed squarely at efficient cutting in wet and heavier crops. 

When you test any forage front, remember you’re judging it for the tough days, not the easy ones.

Forage platform Australia

Ground following on cut-from-the-ground crops

When you are harvesting forage directly off the ground, contour following decides how much material you leave behind. Poor ground following means uneven cutting height, missed crop, and wasted time and money.

All of our DURUS Forage Platforms are fitted with a premium vertical float air-ride adaptor for automatic ground following. The airbags carry the weight of the platform so it sits light on the ground, while gravity keeps the front in contact and following every contour, with only minimal electronics involved. This is a patented design, unique to us. Because the ground following leans on gravity rather than sensors and complex systems, there are fewer points of breakdown and less for you to maintain.

Matching width to your paddocks and forage harvester

We all know when choosing your front’s width, you don’t just pick the largest size. The right size is going to balance your harvest capacity with your need for manoeuvrability and transport.

What to consider when choosing your forage platform’s size:

  • Your paddock size
  • The harvesting speed you need
  • Transport and road movements
  • Forage harvester compatibility
  • Labour on hand

We currently build the DURUS Forage Platform in 25ft and 27ft widths, which covers most broadacre forage operations without turning transport into a headache.

Will it fit what you already run?

A forage platform is only useful if it mounts to your machinery.

The Midwest Durus Forage Platform is a premium, high-capacity draper front manufactured in Australia. It is engineered specifically as a durable, heavy-duty workhorse designed for cutting and directly feeding heavy forage crops, silage, and whole crops, fitting all major brands of self-propelled windrow tractors and front mounted three-point linkage tractors.

Build quality, parts, and support through harvest

Harvest gear has to perform in hard conditions, so durability and backup matter as much as the spec sheet.

A platform is only as good as the support behind it. If you’re waiting on parts during harvest, you’re losing valuable time when every hour counts.

Our DURUS Forage Platform is built with heavy-duty componentry designed to last, and our team support it after the sale with:

  • Phone and service support, 24/7 during harvest time
  • Dealer support across Australia
  • Online parts ordering through your local dealer or our parts store

Before you buy any forage header, ask what support you can get during harvest and how quickly a replacement part can reach you if something lets go mid-season.

Questions to ask before you buy 

Whichever way you go, these are worth putting to any supplier:

  • Was the platform designed for forage harvesting, or adapted from a grain header?
  • How does the drive system hold up in heavy crops?
  • What ground-following system is fitted?
  • What widths are available?
  • What support can you get during harvest?
  • How are spare parts supplied, and how quickly?
  • What maintenance resources come with the machine?

Choosing for the long haul

The right forage platform has to do more than handle this season’s cut. It has to stay reliable, serviceable, and hold its performance year after year. We build our DURUS Forage Platform in Dalby, Queensland, and back it with year-round local support.

If you are reviewing your options before the next season, give us a call on (07) 4662 2137 and we will help you match a platform to your operation.

Frequently asked questions

Is the DURUS Forage Platform purpose-built for forage harvesting?

Yes. As farmers ourselves, we understand the difference in needs between grain fronts and forage fronts. When we designed the DURUS Forage Platform, we scrapped our broadacre platform design and started from scratch, considering only how the forage platform would need to perform to be successful in Australian country.

What widths are available?

Our DURUS Forage Platform is available in 25ft and 27ft widths.

Does the DURUS Forage Platform include ground-following technology?

Yes. It is fitted with a premium vertical float air-ride adaptor for automatic ground following.

Will the DURUS Forage Platform suit different brands?

All of our platforms suit all major brands, including, Claas, New Holland, and John Deere.

How do I access spare parts?

You can access our parts through your nearest dealer, and for anything that isn’t stocked, you can find it in our online parts store.

What support is available after purchase?

We provide manuals, dealer support and phone support for any maintenance assistance.

Leave a Comment